Here’s what you need to know to stay ahead of these upcoming changes and how they might impact your operations.

What’s Changing in the Safety Measurement System?

After years of evaluation, FMCSA is set to overhaul several key aspects of the SMS. Starting from 2023, the agency sought input from various stakeholders, including carriers, drivers, and law enforcement, to revamp its methodology. Now, these changes are on the horizon, and while the specifics won’t be implemented immediately, preparation is essential.

Goodbye to BASICs, Hello to Compliance Categories

The first notable change involves retiring the current seven Behavior Analysis and Safety Improvement Categories (BASICs). Instead, they’ll be replaced by six streamlined “Compliance Categories.” One significant adjustment involves folding Controlled Substances and Alcohol violations into the Unsafe Driving category, alongside all Out-of-Service (OOS) violations.

Vehicle Maintenance Gets a Driver-Specific Update

The Vehicle Maintenance category will also see specific changes. Violations that drivers should catch during pre-trip inspections will now be labeled as “Vehicle Maintenance: Driver Observed.” This list currently includes 858 potential inspection items, although the number may change before implementation. Download the list here.

FMCSA Compliance Division representative Wesley Russell explained, “Dividing those (violations) out does a better job increasing our understanding of what violations are occurring, and gives us a head start already on determining where to go look to determine if maybe there’s smaller things on quick checks that are not being found, or maybe it’s something bigger in the overall maintenance program.”

For drivers, the classification of a maintenance violation as “Driver Observed” can have direct implications. Such violations are likely to appear in the Pre-Employment Screening Program (PSP), making it more challenging for drivers who neglect pre-trip inspections to secure employment.

Changes to Violation Severity Points

Another significant adjustment involves the scoring system for violations. Under the current system, violations are weighted on a scale of 1–10. The new process simplifies this to just two levels:

• Out-of-Service (OOS) violations and driver disqualification incidents will receive a “2.”

• All other violations will receive a “1.”

Additionally, similar violations will be grouped into approximately 100 categories. For example, hours-of-service violations, such as 14-hour, 11-hour, rest break, and 70-hour rule violations, will fall under the same category. This means that only one point will be applied per inspection, even if multiple related violations are identified.

According to Russell, this change helps identify problem areas without penalizing carriers for multiple similar violations during one inspection.

When Will These Changes Take Effect?

FMCSA has not set a definitive date for the new system to go live. Several milestones, such as updating the CSA website and finalizing the methodology, still need to be addressed. For now, carriers and drivers will continue to use the existing system, and all current data in SMS will be transitioned to the new format once the changes are implemented.

Stakeholders can continue to monitor updates, including a prioritization preview, on the FMCSA’s official site here.

Staying Prepared for What’s Ahead

While initial plans included webinars in February and March 2025, these were canceled following January’s session. However, stakeholders can still access valuable resources and submit questions about the changes.

Source: The Trucker

Image Source: fleetequipmentmag

The post Prepare Now for Major FMCSA Safety Measurement System Updates appeared first on Truck Drivers USA.

What is the International Roadcheck?

The CVSA International Roadcheck is an annual initiative designed to enhance road safety. This large-scale operation involves thousands of commercial vehicles and drivers being inspected at weigh stations, inspection sites, and even through mobile units. These inspections focus on verifying adherence to safety regulations, with results collected and shared publicly during the summer.

Each year, the Roadcheck focuses on specific areas of compliance, and this year, the spotlight is on drivers’ records of duty status (RODS) and vehicle tire safety.

What to Expect During the Inspections

CVSA-certified inspectors will primarily conduct the North American Standard Level I Inspection, a comprehensive 37-step procedure. This process ensures compliance with both drivers’ operational requirements and vehicles’ mechanical standards. Additionally, inspectors may vary their approach depending on circumstances, such as weather, using less stringent Level II or Level III inspections if needed.

Spotlight on Driver Safety

For drivers, inspections will include a thorough review of essential documents and compliance checks. Here are some specific areas inspectors will evaluate:

• Licenses and Certificates: Inspectors will review the validity of your license, commercial driver’s license (CDL), medical examiner’s certificate, and skill performance certificate (if applicable).

• Record of Duty Status (RODS): Your hours of service and compliance with the Drug and Alcohol Clearinghouse (in the U.S.) will be closely examined.

• Physical Condition: Inspectors will check for proper seat belt use and signs of drug or alcohol impairment.

Violations in these areas may result in the driver being declared out of service until issues are corrected.

Spotlight on Tires and Vehicle Safety

Inspectors will pay close attention to a vehicle’s tires, as proper maintenance is critical to overall safety. Areas of inspection include:

• Tread Depth

• Inflation Levels

• Visible Damage such as bulges, cuts, or sidewall issues

• Air Leaks or Tread Separation

Beyond tires, the Level I Inspection also evaluates a vehicle’s brake systems, lights, windshield wipers, coupling devices, cargo securement, and more. Additional checks for passenger-carrying vehicles include emergency exits, seat conditions, and electrical systems.

What Happens After an Inspection?

Vehicles that pass Level I or V Inspections without any serious safety violations earn a CVSA decal, valid for three months.

However, if serious violations are discovered, fleet operators and drivers must address these issues before the vehicle can return to service. These violations are classified within the North American Standard Out-of-Service Criteria and must be corrected immediately.

Alternate Inspection Levels

When weather or other conditions make full inspections challenging, inspectors may conduct a Level II Walk-Around or Level III Driver Credential and Administrative Inspection instead. Note, however, that only Level I and V inspections qualify for a CVSA decal.

Source: Truckers News

Image: CVSA

The post Save the Date for CVSA’s 2025 International Roadcheck Event – May 13-15 appeared first on Truck Drivers USA.

The SMS plays a critical role in helping FMCSA identify motor carriers that may require intervention, focusing primarily on safety compliance. The upcoming webinar will spotlight three major changes to the system, which include:

• Reorganizing categories for Vehicle Maintenance and Unsafe Driving, now referred to as “compliance categories.”

• Introducing violation groups to streamline data classification.

• Simplifying severity weights for a more transparent and understandable scoring system.

Stakeholders interested in attending the event can register by clicking here.

Key SMS Changes in Focus

FMCSA has been working to overhaul how safety data and compliance information are displayed under its new SMS methodology. These proposed updates were first introduced in November 2024, following input from various industry voices, including government agencies, advocacy groups, researchers, and the public. FMCSA describes the updates as enhancements to improve “fairness, accuracy, and clarity” within the SMS framework.

According to the agency, these changes aim to build upon the existing structure of the Safety Measurement System while addressing stakeholder concerns.

Industry Reactions

While the trucking industry acknowledges some proposed improvements, concerns still remain, the Owner-Operator Independent Drivers Association (OOIDA), a prominent industry voice, has expressed reservations about the effectiveness of the changes.

Jay Grimes, OOIDA’s director of federal affairs, criticized the updates, stating, “The agency’s modifications fall short of the comprehensive overhauls needed to accurately identify at-risk carriers and reduce truck crashes. These programs won’t achieve their goals until they shift beyond compliance and focus on actual safety performance. A large portion of FMCSA’s data has no meaningful correlation with crash risks. Relying on this flawed data fails to address the underlying issues with CSA/SMS.”

A History of SMS Challenges

The Safety Measurement System can trace its roots back to 2006 when FMCSA first unveiled the CSA 2010 concept, short for “Compliance, Safety, and Accountability.” Initially set for a 2010 launch, the program’s name and structure have evolved over time, but its foundational issues persist, particularly in the areas of data quality and methodology.

OOIDA continues to advocate for more comprehensive reforms, pointing out flaws in the program that stem from its reliance on inconsistent or low-quality data. “The principle of ‘garbage in, garbage out’ applies here,” stated an OOIDA representative in reference to the importance of reliable input data for producing meaningful outcomes. “Without significant changes, the program will remain unable to meet its safety goals.”

What’s Next?

FMCSA is expected to make additional announcements in early 2025, including a projected launch date for the updated SMS. Stakeholders are encouraged to stay informed and utilize available resources to understand how these changes may affect their operations.

For detailed information about the SMS updates or to register for the January 16 webinar, click here.

Source: Land Line

The post FMCSA’s Major SMS Overhaul: What Trucking Stakeholders Need to Know Before January 16 Webinar appeared first on Truck Drivers USA.